![]() And the 3D mount must be heavily modified to fit. THAT cool asus metall mount cools EVOs on slot 2 better than the 3D print one btw. Asus VRM-mount + 40x40 n.a fan i use myself. Played around with drivers as mentioned in 2 sites. Can anyone tell me if that is true?ĭPS_Watchdog_Violation error sata drvier intel I have read in some post online that adaptive mode isn't working correctly. Now back at base and VERY concerned about trying anything else.Īll the above is with Adaptive control selected. Went back to 48 and 1.315 and AVX -3 and that FAILED. I did some more testing tonight to try and get to 49 with AVX -3. With those settings, the system booted and passed real bench. I did go back and try a multiplier or 48 1.315 Vcore and a AVX -3 setting. I am guessing (and it is just a guess from me) that the main reason I am seeing the DPS_Watchdog_Violation error is because my overclock is failing. I am not running XMP at this time but the memory setting is in auto. MP 48 Vcore 1.315 – System booted, ran RealBendh – Temps ~80C, Crashed after about 5 minutes with “DPC_Watchdog_ViolationĪny and all help will be greatly appreciated!!.MP 49 Vcore 1.315 – System booted, ran RealBendh – Temps ~80C, Crashed after about 4 minutes with “DPC_Watchdog_Violation.MP 48 Vcore 1.304 – System booted, ran RealBendh – Temps ~79C, Crashed after about 4 minutes with “DPC_Watchdog_Violation.MP 48 Vcore 1.302 – System booted, ran RealBendh – Temps ~78C, Crashed after about 4 minutes with “DPC_Watchdog_Violation.MP 48 Vcore 1.30 – System booted, ran RealBendh – Temps ~78C, Crashed after about 4 minutes with “DPC_Watchdog_Violation.MP 49 Vcore 1.30 – System would not boot into widows.I tried to follow those steps this morning. Since then I found Raja’s guide for the i7 7600K and the ROG mb. I did figure out that the Vcore ranged up to 1.4 volts, so I am assuming that was what caused the high temperatures. ![]() It did complete the 15-minute REAL Bench stress test but the max core temperature was 91 C. My first attempt a few days ago was at multiple of 45. ![]() After RMA the mb and cpu, I am very leary about updating the BIOS. You will notice in looking at the attached screenshots that the yellow exclamation marks and Error Code 32 warnings are now completely absent from the Device Manager/Processor. I think that it completed successfully, but later that day my system would not POST (had RGB lights but nothing else). Once that was done, the driver in the Core i7-8700 was Processr.Sys, rather than IntelPPM.Sys. I know that my BIOS isn’t up to date, but after getting this motherboard 12/26/18 and getting up and running, I updated the BIOS. I need a lot of help with overclocking my system.
0 Comments
Leave a Reply. |